-
Balzani C, Rosemeier M, Wentingmann M, Noever Castelos P
(2019):
Comparison of different concepts for the fatigue analysis of trailing edge adhesive joints in wind turbine rotor blades,
Wind Energy Science Conference (WESC), June 17-20, 2019, Cork, Ireland
-
Gambier A, Balzani C
(2019):
The challenge of teaching control of wind turbines in a civil engineering school,
Advances in Control Education Symposium, International Federation of Automatic Control (IFAC-ACE 2019), July 07-09, 2019, Philadelphia, Pennsylvania, USA
-
Hach O, Hennings H, Polman JD, Balzani C, Klemme T, Müller S, Rieke J
(2019):
Comparison of state-of-the-art aeroelastic simulation tools for wind turbines,
Wind Energy Science Conference (WESC), June 17-20, 2019, Cork, Ireland
-
Manousides N, Holst T, Balzani C
(2019):
Investigation of the material anisotropy of epoxy-based adhesive joints in wind turbine rotor blades filled with short glass fibres,
Wind Energy Science Conference (WESC), June 17-20, 2019, Cork, Ireland
-
Noever Castelos P, Wentingmann M, Balzani C
(2019):
Investigating non-proportionality of multi-axial stresses in web and trailing edge adhesive joints of wind turbine rotor blades,
Wind Energy Science Conference (WESC), June 17-20, 2019, Cork, Ireland
-
Balzani C, Noever Castelos P, Wentingmann M
(2018):
Finite element analysis and failure prediction of adhesive joints in wind turbine rotor blades,
Proceedings of the 6th European Conference on Computational Mechanics (ECCM6) / 7th European Conference on Computational Fluid Dynamics (ECFD7), June 11-15, 2018, Glasgow, Scotland, Great Britain
-
Balzani C, Rozanski C
(2018):
X-ray microscopy with the Xradia Versa 410,
3rd ZEISS labs@locations Partner Event, April 10-11, 2018, Oberkochen, Germany
-
Wentingmann M, Noever Castelos P, Balzani C
(2018):
An adaptive algorithm to accelerate the critical plane identification for multiaxial fatigue criteria,
Proceedings of the 6th European Conference on Computational Mechanics (ECCM6) / 7th European Conference on Computational Fluid Dynamics (ECFD7), June 11-15, 2018, Glasgow, Scotland, Great Britain
-
Balzani C
(2017):
Verklebungen in Rotorblättern von Windenergieanlagen - Herausforderungen für die Nachweisführung komplexer Spannungszustände,
Seminar: Praxisbeispiele aus dem Konstruktiven Ingenieurbau, RWTH Aachen University, June 13, 2017, Aachen, Germany (on invitation of Prof. Dr.-Ing. habil. Sven Klinkel, Chair of Structural Analysis and Dynamics, RWTH Aachen University), in German
-
Guedes Mendonça H, Balzani C
(2017):
Failure analysis of wind turbine rotor blades: A comparative study of different composite failure models for ultimate load and fatigue events,
20th International Conference on Composite Structures (ICCS20), Sept. 04-07, 2017, Paris, France
-
Noever Castelos P, Voosen M, Balzani C
(2017):
Non-proportional multi-axial stress states and their influence on the fatigue life of trailing edge adhesive joints in wind turbine rotor blades,
Wind Energy Science Conference, June 26-29, 2017, Technical University of Denmark, Lyngby Campus, Copenhagen, Denmark
-
Noever Castelos P, Wentingmann M, Balzani C
(2017):
Comparative study of finite-element-based fatigue analysis concepts for trailing edge adhesive joints in wind turbine rotor blades taking into account different rotor blade designs,
7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Oct. 11-13, 2017, Stuttgart, Germany
-
Noever Castelos P, Wentingmann M, Balzani C
(2017):
Fatigue analysis of trailing edge adhesive joints in wind turbine rotor blades accounting for non-proportional multiaxial stress histories,
20th International Conference on Composite Structures (ICCS20), Sept. 04-07, 2017, Paris, France
-
Noever Castelos P, Balzani C
(2016):
On the impact of multi-axial stress states on trailing edge bond lines in wind turbine rotor blades,
The Science of Making Torque from Wind (TORQUE), Oct. 05-07, 2016, Munich, Germany
-
Noever Castelos P, Balzani C
(2016):
The impact of geometric non-linearities on the fatigue analysis of trailing edge bond lines in wind turbine rotor blades,
WindEurope Summit 2016, Sept. 27-29, 2016, Hamburg, Germany
-
Balzani C
(2015):
Smart Blades: Windenergieanlagen werden smart(er),
ForWind Lecture Series, Jan. 15, 2015, Oldenburg, Germany (on invitation of Stephan Barth)
-
Balzani C
(2015):
Smart Blades - Wind turbines become smart(er),
guest lecture at Indian Institute of Technology Madras (IIT Madras), April 09, 2015, Chennai, India (on invitation of Dr. Sunetra Sarkar, Department of Aerospace Engineering)
-
Horte D, Balzani C, Reuter A
(2015):
Multi-Criteria Evaluation of Multi-MW Wind Turbines,
Smart Blades Symposium 2015, Feb. 11-12, 2015, Oldenburg, Germany
-
Sevinc A, Bleich O, Balzani C, Reuter A
(2015):
Aerodynamic and structural aspects of swept blades in the context of wind turbine load reduction,
Proceedings of the Annual Event of the European Wind Energy Association (EWEA), Full Paper, pp. 1-7, Poster Code: PO.269, Abstract ID: 494, Nov. 17-20, 2015, Paris, France
-
Sevinc A, Bleich O, Balzani C, Reuter A
(2015):
Parameterized analysis of swept blades regarding bend-twist coupling,
Proceedings of DEWEK 2015, July 19-20, 2015, Bremen, Germany
-
Ortega Gómez J, Balzani C, Reuter A
(2014):
Evaluation of the possibility of replacing pitch control by active trailing edge flaps in wind turbines,
Proceedings of the Annual Event of the European Wind Energy Association (EWEA), Full Paper, pp. 1-7, Abstract ID: 800, March 10-13, 2014, Barcelona, Spain
-
Balzani C
(2013):
Status of offshore wind energy in Germany,
International Colloquium organized by the Faculty of Civil Engineering and Geodetic Science, Leibniz Universität Hannover, August 26, 2013, Hannover, Germany
-
Ortega Gómez J, Balzani C
(2013):
Load reduction potential on large wind turbines using active trailing edge flaps,
Conference of the Wind Power Engineering Community (COWEC), VDI Wissensforum, June 18-19, 2013, Berlin, Germany
-
Ortega Gómez J, Balzani C, Reuter R
(2013):
Effect of trailing edge flaps on load reduction of large wind turbines,
Internal student and PhD Seminar among Fraunhofer IWES, ForWind, NTNU Trondheim/Norway, NOWITECH/Norway, June 26, 2013, Bremerhaven, Germany
-
Balzani C
(2012):
Windenergieanlagen werden smart(er),
Seminar on Structural Analysis, Dec. 13, 2012, Karlsruhe, Germany (on invitation of Prof. Dr.-Ing. habil. Werner Wagner, Institute for Structural Analysis, Karlsruhe Institute of Technology)
-
Balzani C
(2012):
Investigation of the local behavior of different cohesive zone models,
83rd GAMM Annual Meeting, March 26-30, 2012, Darmstadt, Germany
-
Balzani C
(2012):
Zur Modellierung von Windenergiesystemen,
Structural Analysis - from Computational Mechanics to 3D Structural Modelling, Colloquium on the occasion of the 60th anniversary of Prof. Dr.-Ing. habil. Werner Wagner, May 11, 2012, Karlsruhe, Germany (on invitation of Prof. Dr.-Ing. habil. Werner Wagner, Institute for Structural Analysis, Karlsruhe Institute of Technology, in German)
-
Balzani C, Wagner W
(2010):
Semi-numerical estimation of critical energy release rates for adhesive joints in composite laminates,
IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France
-
Wagner W, Balzani C, Lauterbach S
(2010):
FE-Modeling of stability-induced coupled ply failure and delamination effects in skin-stringer CFRP panels,
IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France
-
Balzani C
(2009):
Finite-Elemente-Modellierung stabilitätsinduzierter Schädigungseffekte in CFK-Laminaten,
Seminar für Mechanik, Nov. 18, 2009, Kaiserslautern, Germany (on invitation of Prof. Dr.-Ing. habil. Sven Klinkel, Fachgebiet Statik und Dynamik der Tragwerke, TU Kaiserslautern)
-
Lacher S, Balzani C, Wagner W
(2009):
Numerical simulation of the microbond test in fibre reinforced polymers,
3rd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Oct. 21-23, 2009, Hannover, Germany
-
Lauterbach S, Balzani C, Wagner W
(2009):
Analysis of composite failure mechanisms in shell-like laminates using the Puck criteria,
3rd GACM Colloquium on Computational Mechanics, Oct. 21-23, 2009, Hannover, Germany
-
Lauterbach S, Balzani C, Wagner W
(2009):
Failure analysis on shell-like composite laminates using the Puck criteria,
80. GAMM Jahrestagung, Feb. 09-13, 2009, Danzig, Poland
-
Wagner W, Balzani C
(2009):
FE-modeling of damage propagation in axially compressed composite airframe panels,
12th International Conference on Fracture, July 12-17, 2009, Ottawa, Canada, Proceedings CD: Fin01346.pdf, 1-8
-
Wagner W, Balzani C, Lauterbach S
(2009):
Finite-Element-modeling of coupled skin-stringer debonding and ply failure of stiffened CFRP-panels,
6th International Congress of Croatian Society of Mechanics, Sept. 30-Oct. 02, 2009, Dubrovnik, Croatia
-
Wagner W, Balzani C, Lauterbach S
(2009):
Finite-element-modeling of coupled skin-stringer debonding and ply failure of stiffened CFRP-panels,
6th International Congress of Croatian Society of Mechanics (ICCSM6), 30.09.-02.10.2009, Zagreb, Kroatien
-
Balzani C, Wagner W
(2008):
Numerical treatment of damage propagation in axially compressed composite airframe panels,
2nd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures, Sept. 03-05, 2008, Braunschweig, Germany; CD: 1-4
-
Balzani C, Wagner W
(2008):
Simulation of buckling-induced failure in composite laminates,
79th GAMM Annual Meeting, March 31-April 04, 2008, Bremen, Germany
-
Lauterbach S, Orifici AC, Thomson RS, Abramovich H, Wagner W, Balzani C
(2008):
Investigations of the postbuckling damage criticality in multi-stiffened composite airframe panels,
21. Workshop „Composite-Forschung in der Mechanik”, Dec. 01-03, 2008, Bad Herrenalb, Germany
-
Orifici AC, Lauterbach S, Abramovich H, Thomson RS, Wagner W, Balzani C
(2008):
Analysis of damage sensitivity and collapse in postbuckling fibre-reinforced multi-stiffener panels,
2nd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures, Sept. 03-05, 2008, Braunschweig, Germany, CD: 1-4
-
Wagner W, Balzani C
(2008):
Failure analysis in postbuckled laminated composite shell structures,
8th World Congress on Computational Mechanics (WCCM8)/5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), June 30-July 04, 2008, Venice, Italy
-
Balzani C, Wagner W
(2007):
Postbuckling damage simulation in stiffened CFRP panels,
2nd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Oct. 10-12, 2007, Munich, Germany
-
Balzani C, Wagner W
(2007):
Simulation of skin-stiffener debonding in stiffened curved carbon/epoxy panels,
78th GAMM Annual Meeting, July 16-20, 2007, Zurich, Switzerland
-
Wagner W, Balzani C
(2007):
Finite element simulation of skin-stiffener debonding in curved panels of fiber-reinforced composite laminates,
12th Australian International Aerospace Congress, March 19-22, 2007, Melbourne, Australia, CD, 1-12
-
Balzani C, Wagner W
(2006):
Analysis of delamination and skin-stringer separation in uni-directional carbon-fiber-reinforced shell structures,
Conference on Damage in Composite Materials: Simulation and Non-Destructive Testing, Sept. 18-19, 2006, Stuttgart, Germany
-
Balzani C, Wagner W
(2006):
Delamination analysis of UD composites using interface elements,
77th GAMM Annual Meeting, March 27-31, 2006, Berlin, Germany
-
Balzani C, Wagner W
(2006):
Numerische Simulation von Delaminationen in unidirektionalen Faserverbund-Laminaten mit Hilfe von kohäsiven Interface-Elementen,
Research Colloquium, Jan. 25-28, 2006, Hirschegg, Austria (in German)
-
Wagner W, Balzani C
(2006):
Finite element simulation of skin-stiffener debonding in curved fiber-reinforced shell structures,
19th Workshop „Composite Research in Mechanics”, Nov. 26-29, 2006, Bad Herrenalb, Germany
-
Wagner W, Balzani C
(2006):
Modeling of skin-stringer separation with cohesive zone elements in fiber-reinforced composite shells,
7th World Congress on Computational Mechanics, July 16-22, 2006, Los Angeles, California, USA
-
Wagner W, Balzani C
(2006):
Simulation of delamination in stringer stiffened fiber-reinforced composite shells,
III European Conference on Computational Mechanics - Solids, Structures and Coupled Problems in Engineering, June 05-08, 2006, Lisbon, Portugal, CD: papers\1204.pdf, 1-16
-
Balzani C, Wagner W
(2005):
An interface element for the simulation of delamination in unidirectional fiber-reinforced composite laminates,
EUROMECH Colloquium 473: Fracture of composite materials, Oct. 27-29, 2005, Porto, Portugal
-
Balzani C, Wagner W
(2005):
A simple model for the simulation of delamination in fibre-reinforced composite laminates under mixed-mode loading conditions,
76th GAMM Annual Meeting, March 28-April 01, 2005, Luxembourg
